It's sometimes difficult to understand the different types of batteries, but such an understanding is crucial for battery safety. For example, a Yuasa sealed lead-acid battery is a type of industrial battery that is designed so that during the charging process, oxygen is generated, captured and recombined within the battery. The electrolyte is confined, but the gases escape through a vent or valve if the pressure inside exceeds its threshold.
These types of batteries work well for many industrial and day-to-day purposes, even in cars, boats and power generators. However, you should take the necessary safety precautions while using Yuasa sealed lead-acid batteries. Here are some quick tips for industrial battery safety.
Battery Storage Safety
When storing industrial batteries, be sure the storage area is well ventilated. Also, industrial batteries should not be stored near flames or where sparks can form. For damaged batteries, be sure to label these as "damaged" and store them in containment structures that are acid-resistant.
Tips for Charging Yuasa Sealed Lead-Acid Batteries
When charging industrial batteries, use a charger that is designed for that particular battery. Otherwise, you could permanently damage the battery or cause a fire to occur. The charging area should not be located near where flames, electric arcs or sparks could form. Never over-charge an industrial battery. Always replenish the battery fluid with distilled water.
If in a work environment, be sure there are emergency wash facilities located near the charging and storage areas. Also in both the charging and storage areas, hang signs stating "No Smoking - Flammable."
Storing and Pouring Acid for Yuasa Sealed Lead-Acid Batteries
When storing acid for industrial batteries, keep the acid away from direct sunlight and be sure the storage area stays cool at all times. Always use nonmetallic funnels and containers. Pour the concentrated acid into the water very slowly and carefully; do NOT pour water into the acid. Wear safety gloves, goggles and arm protection while working with acid.
If you get acid in your eyes, flush them immediately with water for at least 15 minutes, and then seek medical attention. If you get acid on your skin, rinse the skin immediately with lots of water. If the acid burns appear to be second degree burns or worse, then seek medical attention. In case of an acid spill, neutralize the spill with baking soda, and then rinse it with clean water.
Servicing Industrial Batteries
Service industrial batteries regularly and inspect them for loose connections, corrosion on connectors or terminals, cracked areas on the battery case or cover, loose clamps, and defective cables. Replace any worn or torn parts. Clean the battery terminal and clamps with a tapered brush and a baking soda solution, but be careful not to touch both terminals simultaneously as this can cause shock. Be sure to follow the Yuasa sealed lead-acid battery manufacturer's guide when replacing or repairing the battery.
Follow these tips to use Yuasa sealed lead-acid batteries safely and effectively. You'll get longer use out of the batteries, and will also protect yourself and others from injury.
To learn
more about subjects like Yuasa sealed-lead acid battery
please visit the web site at: http://www.batteryconcepts.net
For
more information and informative related articles and links
about this subject matter and content, please visit Majon's
Engineering | Environment directory:
http://www.majon.com/directory/engineering-environment. Also visit our
Shopping Directory Marketplace for more
related sites.
About
the Author
Chris Robertson is a published author of Majon
International. All Rights Reserved. Copyright 2010 (Mon Nov 13 2006)
Majon International. Majon International is one of the
worlds MOST popular internet
marketing and internet
advertising companies on the web. Visit their
main business resource web site at: http://majon.com
NEWS FLASH! 
Blink
Del.icio.us
Digg
Google
Simpy
Spurl
